高精度薄壁钢套类零件制造工艺

薄壁钢套类零件是机械制造中常碰到的一类难加工零件,由于其不同的功能用途和典型结构特点,其制造有一定难度,在实际生产过程中,经常出现加工制造后的零件尺寸精度、形状精度、形位精度达不到使用及设计要求。本文较系统地阐述了薄壁钢套类零件的典型制造工艺方法以及在制造过程中的变形分析和应对措施。     

Detecting Cysteine in Bioimaging with a Near-Infrared Probe Based on a Novel Fluorescence Quenching Mechanism

Near-infrared (NIR) fluorescent probes are very significant for detecting cysteine in biological systems. Herein, we report a highly selective and sensitive NIR turn-on fluorescent probe (BDP-NIR) based on BODIPY with large Stokes shift (105 nm) for detecting Cys. We clarified the sensing mechanism based on the different thiol-induced S_NAr substitution/rearrangement reaction of the probe with cysteine and homocysteine/glutathione, which leads to the corresponding amino- and thiol-BODIPY dyes with distinct photophysical properties. Moreover, a novel mechanism of fluorescence quenching was demonstrated by density functional theory calculation. The reason for the fluorescence quenching of the probe might be intersystem crossing (from singlet to triplet excited state). Moreover, BDP-NIR had a high linear dynamic range of 0–500 μM, which was promising for detecting cysteine quantificationally. Significantly, BDP-NIR was capable of sensing endogenous cysteine in living cells and in vivo.     

B对FeCoCrNiSiBx高熵合金激光熔覆层组织和硬度的影响

采用激光熔覆制备了FeCoCrNiSiB_x高熵合金熔覆层,利用光学显微镜、扫描电镜、X射线衍射仪和显微硬度计研究微量硼元素(摩尔比x=0、0.02、0.04、0.06、0.08)对FeCoCrNiSiB_x高熵合金熔覆层组织和硬度的影响。结果表明:无B高熵合金涂层组织主要为胞状晶。B的添加会促进枝晶的生成,逐渐形成鱼骨状树枝晶,但过量的B会破坏枝晶完整性,形成蠕虫状晶。此外,高熵合金熔覆层组织为FCC和BCC双相结构,B元素的添加会形成大量0.1~2.6 μm的Cr₂B第二相,有助于提高熔覆层硬度,其中x=0.06时激光熔覆层的硬度最高,约为537 HV0.2。     

再加工工艺对N18锆合金板残余应力的影响

采用“热轧+冷轧+退火”工艺对N18锆合金板进行再加工,通过X射线法分析板的表面残余应力,采用EBSD技术分析晶界取向差角分布和大小角度晶界。结果表明,热轧后N18锆合金板的表面残余应力呈现无规律分布状态;冷轧后板的表面残余应力均为压应力,其大小随着冷轧变形量的增加而增加;退火后板的表面残余应力值处于较低水平,当退火制度为500 ℃×2 h时,残余应力处于最低水平;退火后,板的微观结构以小角度晶界为主,且随着退火温度的升高,小角度晶界的密度先增加后趋于稳定。     

Easy access to pharmaceutically relevant heterocycles by catalytic reactions involving α-imino gold carbene intermediates

This review summarizes recent advances in the field of gold-catalyzed synthesis of pharmaceutically relevant aza-heterocycles via in situ generated α-imino gold carbene complexes as intermediates.     

柔性夹具技术研究

为适应快速多变的市场需求,制造企业需要设计并应用柔性夹具。介绍了柔性夹具的发展及特点,给出了柔性夹具的设计依据,并从零件结构及工艺、组成元件确定、强度与精度保证等方面分析了柔性夹具的设计方法。     

Evaluation on Dorsey Method in Surface Tension Measurement of Solder Liquids Containing Surfactants

With the purpose of developing a feasible approach for measuring the surface tension of solders containing surfactants, the surface tension of Sn–3Ag–0.5Cu–xP solder alloys, with various drop sizes as well as different phosphorus (P) content, was evaluated using the Dorsey method based on the sessile drop test. The results show that the accuracy of the surface tension calculations depends on both of sessile drop size and the liquid metal composition. With a proper drop size, in the range of 4.5 mm to 5.3 mm in equivalent spherical diameters, the deviation of the surface tension calculation can be limited to 1.43 mN·m^?1 and 6.30 mN·m^?1 for SnAgCu and SnAgCu–P, respectively. The surface tension of SnAgCu–xP solder alloys decreases quickly to a minimum value when the P content reaches 0.5 wt% and subsequently increases slowly with the P content further increasing. The formation of a P-enriched surface layer and Sn₄P₃ intermetallic phases is regarded to be responsible for the decreasing and subsequent increasing of surface tension, respectively.     

A transient fluid–structure interaction analysis strategy and validation of a pressurized reactor with regard to loss-of-coolant accidents

Nuclear Science and Techniques - Rare event search experiments are one of the most important topics in the field of fundamental physics, and high-purity germanium (HPGe) detectors with an ultra-low...